贴好的砖有色差? 别急,先看看问题在哪里
2018-12-06    阅读人数:72

最近有很多业主问小曼,家里地面铺了大理石瓷砖,在窗口下面和过道有些砖颜色好像不对,好像有色差,但从不同地方看,那颜色又不一样,用手机拍又拍不出来是怎么一回事儿?但把灯开起来或把窗户关起来,发现这样每片砖颜色都一样?其实,这种情况很常见,是因为砖面是有施了一层亮光釉,对光线产生折射作用,用肉眼从不同角度来看,会产生色差,其实这种不是真正的色差,这种情况不属于产品质量问题。


Recently, a lot of owners asked me that the floor of his house had been covered with marble tiles. Under the window and in the hallway, some bricks seemed wrong in color, and there seemed to be color difference. But from different places, the color was different. What's wrong with a cell phone camera? But turn on the lights or close the windows and find that every brick is the same color? In fact, this kind of situation is very common because there is a layer of bright glaze on the brick surface, which refracts the light. When viewed from different angles with the naked eye, the color difference will occur. In fact, this kind of color difference is not true. This situation is not a matter of product quality.


-RD9912B 汉玛白-

1.jpg


2.jpg


3.jpg


为了让大家更易理解这种情况,大家可以像下面视频一样做个试验,就知道小曼的意思了!


In order to make it easier for you to understand this situation, you can do an experiment like the video below, and you will know what I means!



微信截图_20181206085840.jpg


看完视频后,大家伙是不是感觉像在变魔术一样那么不可思议?是的,瓷砖颜色有时就是受光线影响很大。所以,当发现瓷砖有色差时,要分析问题找到原因,不要一看有点色差就说瓷砖质量有问题。


After watching the video, does the big guy feel as magical as magic? Yes, tile color is sometimes affected by light. Therefore, when the ceramic tile color difference, should analyze the problem to find out the reason, do not see a little color difference said that tile quality problems.


-RD9918B 金丝灰-


4.jpg


5.jpg


6.jpg


那还有哪些瓷砖色差会经常遇到,还老被冤枉是瓷砖质量有问题呢?今天,小曼就和大家一起寻找答案!


That still have what ceramic tile color difference can often encounter, still be wronged is ceramic tile quality problem all the time? Today, I’ll looking for answers with you!



01


补货混色号混批

瓷砖在生产出来分拣时,是有分色号批次的,不同色号批次是有一定色差的。如果我们购买时,是一个色号,等补货时,业主和商家都没注意,补了另外一个色号时,就会出现色差,所以,在补货时建议补同色号同批次。


Ceramic tiles in the production of sorting, is a color number batches, different color number batches have a certain color difference. If we buy, is a color number, and so on replenishment, the owner and the merchant did not notice, when filled another color number, will appear the color difference, therefore, when restocking suggests to fill the same color number the same batch.


-RD9909B 洱海-

7.jpg


8.jpg


9.jpg


02


泡水不均匀


这种情况一般出现在墙砖,大家伙都知道,墙砖吸水率比较高,在铺贴前都要泡水,但有的时候,可能赶工,有的砖泡的不均匀或者泡水时间长短不一样,当这砖干了以后,就有可能出现颜色不一样。罗曼缔克的墙砖均采用全瓷超白底坯,吸水率几乎为零,给您带来更好的家居生活体验。


-RD189P001A 路易斯-

10.jpg


11.jpg


12.jpg


03


防水没做好,墙体漏水

和第二条原理一样,也是经常出现在墙砖铺贴后,墙体或地面有漏水,致使有吸入水分多的砖颜色深。这种情况一般经常出现在水龙头水管附近一些容易漏水的地方。


As with the second principle, it often appears after the wall tile is laid, the wall or the ground has leakage, resulting in more water inhalation brick color. This is usually the case in the faucet near some of the easy leakage.


-RD189P002A 意大利灰-


14.jpg


04


清洗保养不当


瓷砖铺贴好后,在清理时,为了能清理干净点能快点,有的用了一些酸性或碱性的清洁剂来清理,这样会破坏瓷砖表面的防污层,致使砖表面出现光泽度不同,也造成色差,这种情况一般出现在地砖。


After laying the tiles, in order to clean up quickly, some use some acid or alkaline detergents to clean them up. This will destroy the antifouling layer on the tile surface, resulting in different gloss on the tile surface and resulting in color aberration. This is usually the case with floor tiles.


-RD189P904A 多瑙河-

15.jpg


16.jpg


17.jpg


05


纹理效果造成误会


现在生产的大理石瓷砖为了追求自然、大气、富有变化的效果,在设计时,模仿天然大理石的纹理,整体纹理变化大,在大面积铺贴时还好,但铺贴在面积不大的地方时,可能会造成“色差”的结果。


In order to pursue the natural, atmospheric, and varied effects, the marble tiles produced today are designed to mimic the texture of natural marble. The overall texture changes greatly, while the overall texture is good when there is a large area of paving, but when the area is not large, the tile is pasted in a small area. May result in color aberration.



-RD189P903A 柯林斯灰-
18.jpg

19.jpg

20.jpg

随着喷墨技术的广泛应用,在加上烧成技术的稳定,现在许多砖一般都是用喷墨印刷的,可以说很少会有色差现象出现。当我们遇到客户反映瓷砖有色差时,要从仓库管理、销售过程管理、施工过程、特别是现场光线等环节来分析原因,这样就不会一股脑把责任全推到瓷砖质量本身上去。


With the wide application of inkjet technology and the stability of sintering technology, many bricks are usually printed by inkjet now, it can be said that there are few color aberrations. When we meet with customers reflecting the color difference of ceramic tiles, we should analyze the reasons from warehouse management, sales process management, construction process, especially field light, so that we will not put all the responsibility on the tile quality itself.



小曼的产品,这种色差的自然之美不仅仅局限于大理石瓷砖,小曼的现代仿古砖,现代木纹砖以及行业首创的300.800黄金比例的瓷质墙地砖等,为了追求更加自然的空间美以及设计的时尚感,在主砖,花砖及配砖工艺上很多都采用了这种深浅交替色,渐变色等特殊工艺,让产品花色纹理更加美观自然,设计感更加强烈,这么美的产品,你不想拥有吗.......


Romantic's products, this natural beauty of color difference is not limited to marble tiles, Romantic's modern antique tiles, modern wood-grain tiles and 300.800 gold-ratio ceramic wall and floor tiles, etc. In order to pursue more natural space beauty and fashion sense of design, many of the main tiles, tiles and matching technology are adopted. With this special technology, such as alternating shades, gradient colors and so on, it makes the product more beautiful and natural in color and texture, and has a stronger sense of design. Don't you want to own such a beautiful product?